F vellpont

Indoor Finnish Sauna

Frost 2-Person Indoor Finnish Sauna

Vellpont

From 97.000,00 Kč

Honest materials and exacting engineering, the Frost Indoor Finnish Sauna is an indoor Finnish sauna for up to 2 people from Vellpont. At 210 × 145 × 212 cm it fits where space is tight, seating 2. Each unit is built to order to a consistent, exacting standard and backed by Vellpont specialist support.

Overview

  • Authentic Finnish löyly heat from a 4.5 kW heater with digital control
  • Seating for up to 2 adults on a single wide bench
  • Reaches an operating temperature of 80–110 °C
  • Available in 4 cladding woods: Nordic Spruce, Nordic Aspen, Thermo-Treated Alder and Canadian Red Cedar
  • Fully assembled, ready-to-wire cabin for indoor installation

Materials & Construction

  • Interior clad in kiln-dried, knot-selected timber — choose Nordic Spruce, Nordic Aspen, Thermo-Treated Alder and Canadian Red Cedar
  • Insulated timber-framed structure with 40–60 mm mineral wool and a foil vapour barrier
  • Full-height door in clear low-iron tempered glass
  • Toughened-glass viewing window
  • Ergonomic, back-friendly bench profiles with rounded, splinter-free edges
  • Ventilated duckboard flooring

Heating & Performance

  • Heater output: 4.5 kW
  • Operating temperature: 80–110 °C
  • Heat-up time: approx. 30–40 minutes
  • Recommended room volume: approx. 6 m³
  • Heater stone capacity: 15–20 kg (sauna stones included)

Dimensions & Capacity

  • External dimensions: 210 × 145 × 212 cm (W × D × H)
  • Internal height: approx. 196 cm
  • Floor area: approx. 3 m²
  • Seating capacity: 2 adults on a single wide bench
  • Weight (assembled): approx. 265 kg

What’s Included

  • 4.5 kW electric sauna heater with sauna stones
  • Digital control panel with timer and temperature setting
  • Interior LED lighting
  • Wooden backrest, headrest and duckboard
  • Bucket, ladle and a bench-mounted thermometer/hygrometer
  • Full assembly instructions and fixings

Technical Specifications

  • Power supply: 230 V single-phase
  • Connected load: 4.5 kW
  • Control: external digital controller with pre-set timer
  • Protection class: IP24 heater; low-EMF certified
  • Compliant with EN 60335-2-53 sauna-heater safety standard

Installation & Requirements

  • Requires a level indoor floor; a nearby drain is recommended
  • A dedicated 230 V circuit is required for connection
  • Air inlet below the heater and an adjustable outlet vent maintain circulation
  • Delivered pre-assembled in sections for a straightforward on-site build

Wellness Benefits

The Frost recreates the traditional Finnish ritual — dry radiant heat balanced by bursts of löyly when water is cast over the stones. Regular sessions are associated with muscular relaxation, easier sleep and a calmer mind.

Care & Maintenance

Wipe the timber benches with a damp cloth after use and air the cabin with the door open. Treat interior wood periodically with sauna-specific paraffin oil; never varnish or paint the interior. Re-stack the heater stones and check the heater once a season.

Delivery, Warranty & Ordering

Built to order and dispatched in approximately 6–8 weeks. Kerbside or in-room delivery across the Czech Republic and the EU; installation can be arranged on request. Covered by the Vellpont 5-year warranty with lifetime specialist support. Prices are shown in Czech koruna (CZK), incl. VAT.

Reference
VLP-IFN-0043-01
Availability
Built to order
Delivery
Delivery across the EU