Indoor Finnish Sauna
Tapiola 6-Person Indoor Finnish Sauna
Vellpont
Conceived for slow evenings and clear mornings, the Tapiola Indoor Finnish Sauna is an indoor Finnish sauna for up to 6 people from Vellpont. Its 285 × 240 cm footprint suits a dedicated wellness room or generous garden setting, with roughly 13.6 m³ to heat. Built to order in measured batches and backed by the Vellpont support team.
Overview
- Authentic Finnish löyly heat from an 10.5 kW heater with digital control
- Seating for up to 6 adults on two-tier wrap-around benching
- Reaches an operating temperature of 80–110 °C
- Available in 4 cladding woods: Nordic Spruce, Nordic Aspen, Western Hemlock and Thermo-Treated Alder
- Fully assembled, ready-to-wire cabin for indoor installation
Materials & Construction
- Interior clad in kiln-dried, knot-selected timber — choose Nordic Spruce, Nordic Aspen, Western Hemlock and Thermo-Treated Alder
- Insulated timber-framed structure with 40–60 mm mineral wool and a foil vapour barrier
- Full-height door in 8 mm tempered safety glass
- Toughened-glass viewing window
- Ergonomic, back-friendly bench profiles with rounded, splinter-free edges
- Ventilated duckboard flooring
Heating & Performance
- Heater output: 10.5 kW
- Operating temperature: 80–110 °C
- Heat-up time: approx. 40–55 minutes
- Recommended room volume: approx. 13.6 m³
- Heater stone capacity: 30–40 kg (sauna stones included)
Dimensions & Capacity
- External dimensions: 285 × 240 × 212 cm (W × D × H)
- Internal height: approx. 196 cm
- Floor area: approx. 6.8 m²
- Seating capacity: 6 adults on two-tier wrap-around benching
- Weight (assembled): approx. 505 kg
What’s Included
- 10.5 kW electric sauna heater with sauna stones
- Digital control panel with timer and temperature setting
- Interior LED lighting
- Wooden backrest, headrest and duckboard
- Bucket, ladle and a bench-mounted thermometer/hygrometer
- Full assembly instructions and fixings
Technical Specifications
- Power supply: 400 V 3-phase
- Connected load: 10.5 kW
- Control: external digital controller with pre-set timer
- Protection class: IP24 heater; low-EMF certified
- Compliant with EN 60335-2-53 sauna-heater safety standard
Installation & Requirements
- Requires a level indoor floor; a nearby drain is recommended
- A 400 V 3-phase supply and a qualified electrician are required
- Air inlet below the heater and an adjustable outlet vent maintain circulation
- Delivered pre-assembled in sections for a straightforward on-site build
Wellness Benefits
Twenty minutes in the Tapiola at full heat, a cool rinse, and repeat — the classic hot-and-cold cycle that eases sore muscles, quiets the mind and leaves you genuinely relaxed.
Care & Maintenance
Wipe the timber benches with a damp cloth after use and air the cabin with the door open. Treat interior wood periodically with sauna-specific paraffin oil; never varnish or paint the interior. Re-stack the heater stones and check the heater once a season.
Delivery, Warranty & Ordering
Built to order and dispatched in approximately 7–9 weeks. Kerbside or in-room delivery across the Czech Republic and the EU; installation can be arranged on request. Covered by the Vellpont 5-year warranty with lifetime specialist support. Prices are shown in Czech koruna (CZK), incl. VAT.